Views: 0
A 20,000 BPH water bottling line is designed to meet the production requirements of medium and large-scale bottled water factories.
This project configuration is based on a complete automatic PET water bottling line with an XGF40-40-12 rotary rinsing, filling and capping machine. The standard production capacity is 20,000 bottles per hour for 500ml PET bottles.
The same filling machine can also be used to produce 1.5L bottled water. However, the actual production capacity of the complete line depends on the water treatment capacity and the configuration of other production equipment.
For factories mainly producing 500ml bottled water, a 12T/H water treatment system can be retained, with an estimated production capacity of approximately 6,000 BPH for 1.5L bottles.
If the factory wants to increase 1.5L production, the water treatment system can be upgraded to 15T/H. Under this configuration, the complete production line can achieve approximately 8,000–10,000 BPH for 1.5L bottles.
This article explains the equipment configuration, production capacity differences and investment considerations for both bottle sizes.
The complete bottled water production line includes water treatment, PET bottle blowing, rinsing and filling, labeling, packaging, palletizing and conveyor systems.
The following configuration is based on an actual 20,000 BPH bottled water project.
Production Section | Main Equipment | Configuration |
|---|---|---|
Water Treatment | Reverse Osmosis Water Treatment System | 12T/H |
Water Storage | Pure Water Storage Tanks | 2 × 10T |
Bottle Blowing | Automatic PET Bottle Blowing Machine | 20,000 BPH for 500ml |
Filling | Automatic 3-in-1 Filling Machine | XGF40-40-12 |
Cap Handling | Automatic Cap Loader | 20,000 BPH |
Cap Sterilization | Online Cap Sterilization System | 20,000 BPH |
Labeling | Automatic OPP Labeling Machine | 20,000 BPH |
Coding | Laser Coding Machine | Automatic |
Packaging | Automatic Film Shrink Wrapping Machine | YCBS26 |
Palletizing | Automatic Palletizer | With Stretch Wrapping Machine |
Conveying | Air Conveyor and Bottle Conveyor | Complete line |
The equipment is designed to work together as an integrated production system rather than operating as independent machines.
One important feature of this project is that the same XGF40-40-12 three-in-one automatic water filling machine can be used for both 500ml and 1.5L PET bottles.
The machine integrates three operations:
Bottle rinsing
Pure water filling
Bottle capping
Its configuration includes:
Item | Specification |
|---|---|
Machine Model | XGF40-40-12 |
Rinsing Heads | 40 |
Filling Heads | 40 |
Capping Heads | 12 |
Filling Product | Drinking Water |
Filling Type | Gravity Filling |
Bottle Material | PET |
Bottle Handling | Neck-Holding System |
Liquid Contact Parts | SUS304 Stainless Steel |
The neck-holding design allows the machine to handle different PET bottle formats without requiring replacement of the entire filling machine.
When switching between 500ml and 1.5L bottles, the necessary format adjustments and change parts should be confirmed according to the actual bottle dimensions and neck specifications.
The filling machine model remains the same. The production capacity of the complete line, however, is different because the water consumption per bottle increases with bottle volume.
Water treatment capacity is a critical factor when planning a multi-size bottled water production line.
The standard configuration for this 20,000 BPH project uses a 12T/H reverse osmosis water treatment system.
The main treatment process includes:
Raw water pumping
Quartz sand filtration
Activated carbon filtration
Sodium ion exchange
Precision filtration
Reverse osmosis
UV sterilization
Ozone sterilization and mixing
Pure water storage
The system also includes two 10-ton pure water storage tanks to provide water storage and production buffering.
If 500ml bottles are the main product and 1.5L bottles are produced occasionally on the same production line, the factory can retain the existing 12T/H water treatment configuration.
The estimated production capacity for 1.5L bottles is approximately 6,000 BPH.
This option is suitable for factories that want to manufacture different bottle sizes without significantly increasing their initial investment in water treatment equipment.
If the factory expects higher demand for 1.5L bottled water, upgrading the water treatment system from 12T/H to 15T/H is recommended.
With the increased water supply capacity, the complete production line can achieve approximately 8,000–10,000 BPH for 1.5L bottles.
This option is suitable for factories where 1.5L bottled water represents a significant proportion of total production.
The following table compares the two production configurations.
Item | 500ml Production | 1.5L Production – Option A | 1.5L Production – Option B |
|---|---|---|---|
Filling Machine | XGF40-40-12 | XGF40-40-12 | XGF40-40-12 |
Water Treatment | 12T/H | 12T/H | 15T/H |
Bottle Volume | 500ml | 1.5L | 1.5L |
Complete Line Capacity | 20,000 BPH | Approx. 6,000 BPH | Approx. 8,000–10,000 BPH |
The main difference between the two 1.5L production options is the water treatment capacity.
Our recommendation:
If 500ml is the main bottle format, retaining the 12T/H water treatment system is a practical solution.
If the factory plans to increase 1.5L production, upgrading to a 15T/H water treatment system provides more production capacity.
The reason is straightforward: each 1.5L bottle requires three times as much water as a 500ml bottle.
For a 20,000 BPH production line:
500ml production:
20,000 × 0.5L = 10,000 liters per hour.
1.5L production at 6,000 BPH:
6,000 × 1.5L = 9,000 liters per hour.
1.5L production at 8,000 BPH:
8,000 × 1.5L = 12,000 liters per hour.
1.5L production at 10,000 BPH:
10,000 × 1.5L = 15,000 liters per hour.
This explains why increasing water treatment capacity from 12T/H to 15T/H is important when targeting 8,000–10,000 BPH for 1.5L bottles.
These figures represent nominal filling-water demand. Actual system selection should also account for RO recovery rate, operating conditions, water consumption elsewhere in the factory and available storage capacity.
Changing from 500ml to 1.5L bottles requires checking the complete production line, not just the filling machine.
The following equipment should be considered:
The bottle blowing machine must be configured with the appropriate 1.5L bottle mould, preform specifications and production capacity.
The reference technical specification in this project includes an 8-cavity PET blowing machine with a stated output of up to 12,000 BPH for 1,000–1,500ml water bottles.
The actual output must be matched to the required complete-line speed.
The OPP labeling machine should be equipped with the corresponding format change parts for 1.5L bottles.
The labeling speed must be compatible with the target production capacity.
The shrink wrapping machine needs to accommodate the dimensions and weight of 1.5L bottles.
The packaging configuration, including the number of bottles per pack, should be confirmed before selecting the final machine model.
The air conveyor, bottle conveyor and supporting motors must be checked against the larger bottle dimensions and actual line speed.
This ensures stable bottle transportation between the blowing, filling, labeling and packaging sections.
Choosing between 12T/H and 15T/H water treatment systems depends mainly on the factory's production plan.
Choose the 12T/H configuration if:
500ml is your main bottle format.
1.5L production is occasional or secondary.
You want to control the initial equipment investment.
Approximately 6,000 BPH for 1.5L is sufficient.
Choose the 15T/H configuration if:
You expect significant demand for 1.5L bottled water.
You want approximately 8,000–10,000 BPH for 1.5L.
Your factory requires higher water supply capacity.
You want to increase production flexibility.
Before purchasing a complete bottled water production line, it is important to confirm the bottle sizes, target output, raw water quality and future production plans.
Q1: Can the same filling machine produce both 500ml and 1.5L bottles?
Yes. The XGF40-40-12 three-in-one rinsing, filling and capping machine can be used for both 500ml and 1.5L PET bottles, subject to confirmation of bottle dimensions and format compatibility.
Q2: What is the 1.5L production capacity with a 12T/H water treatment system?
When retaining the existing 12T/H water treatment configuration, the complete production line can achieve approximately 6,000 BPH for 1.5L bottles.
Q3: How can I achieve 8,000–10,000 BPH for 1.5L bottles?
The water treatment system should be upgraded to 15T/H, and the blowing, labeling, conveying and packaging equipment must also be matched to the required production speed.
Q4: Do I need to purchase another filling machine when changing from 500ml to 1.5L?
No. The same XGF40-40-12 filling machine can be used for both bottle sizes. Necessary format adjustments and compatible bottle-handling configurations should be confirmed.
Q5: What information is needed to design a complete water bottling line?
The main information includes:
Bottle sizes and bottle drawings
Required production capacity for each bottle size
Raw water analysis report
Bottle and cap specifications
Label type
Packaging requirements
Factory layout and available space
A 20,000 BPH bottled water production line can offer flexible production for both 500ml and 1.5L PET bottles using the same XGF40-40-12 three-in-one filling machine.
For factories mainly producing 500ml bottles, the standard 12T/H water treatment system can be retained, with an estimated 1.5L production capacity of approximately 6,000 BPH.
For factories requiring higher 1.5L production, upgrading the water treatment system to 15T/H can increase the estimated complete-line capacity to approximately 8,000–10,000 BPH.
At Nancheng, we provide complete bottled water production line solutions, including water treatment, PET bottle blowing, filling, labeling, packaging and palletizing systems.
Contact our engineering team to discuss your bottle specifications and production requirements.